Currently we are calculating your interaction numbers. Interaction numbers are a way for us to reward members who have contributed to the network. Members who have helped to build the network are being rewarded with free access at a rate relative to the amount of content they have contributed. Your interaction number will be posted to your page in the comment section. Members with a zero will have to purchase access once their time runs out. Once your number has been calculated it can not be changed.To see how your number is calculated click the link above that says "interaction number" after you login. Members with usernames starting with A,B,C,D,E,F,G,H have been calculated so far.

All Blog Posts (194)

charles ware EPA study

 

According to this web page http://holysmoke.org/hho/the-facts.html , "the EPA tested two dozen HHO units and they were all found to be ineffective". Googling a few variations of EPA HHO evaluation and searching the EPA website turned up nothing. Was these ever such an evaluation done?  I should think DOE would be more likely to sponsor such an evaluation rather than the EPA.

 

This article also says that if HHO were…

Continue

Added by charles ware on January 25, 2012 at 3:00pm — 3 Comments

charles ware   On this web page:  http://aardvark.co.nz/hho_fraud.shtml   is an article entitled "Examining the Science of 'HHO' Systems"   Notice how he put HHO in quotes.  Here is a comment on this article that…

 

On this web page:  http://aardvark.co.nz/hho_fraud.shtml   is an article entitled "Examining the Science of 'HHO' Systems"   Notice how he put HHO in quotes.  Here is a comment on this article that I did:

http://www.hho-research.org/FISITA.pdf

 

I asked aardvark if they would care to comment on my comments. I sent that request on 1/21/12.  I have yet to hear…

Continue

Added by charles ware on January 24, 2012 at 2:30pm — 5 Comments

Catherine K Largest Energy Show in the Country -Phoenix Jan 30-Feb 1

http://www.euec.com/index.aspx

Once again, the annual Energy, Utility & Environmental Conference will take place in Phoenix at the Phoenix Convention Center downtown.

Admission is kind of pricey ($995 and up) for the scientific sessions, but the exhibit area is open to the public both Monday and Tuesday nights from 5:00 pm to 7:00 pm. 

I would highly recommend anybody with some spare time going, to…

Continue

Added by Catherine K on January 17, 2012 at 12:55pm — No Comments

ehnriko The Green Technology Program

I started playing around with HHO way back in 1987... to 1988 using a mayo-jar with 2 electrodes, vacuum fed into a 1300cc VW motor. It was a Father and Son experiment. Since Gasoline prices was lower then since it was just after the oil crisis, we just got bored in using the rusty bug and stopped experimenting.  I found myself back into HHO in 2007 due to force of circumstances... I needed to continue some welding jobs when we ran out of welding gas in Saudi Arabia... since I was under…

Continue

Added by ehnriko on December 12, 2011 at 4:35am — 1 Comment

Richard Dobyns h2

built a aluminum lye generator and am in the phase of hooking it up. I
have worked out a system to energise it and shut it down. What I want to know
is since the lye and water will consume aluminum , after it has
been turned into H2 and is hydrogen will it damage my aluminum heads on
the car. What filters and bubelers do I need to get clean hydrogen to my
combustion chamber. Have a dry carbon now. richarddobyns@hotmail.com

Added by Richard Dobyns on November 12, 2011 at 3:56pm — 1 Comment

hHOFEe The Perfect System?

I would like to hear from anyone who wishes to take the time to tell me "what the perfect hho system is" to them. Please include features, functions, installation issues, etc ... Anything about it at all, you don't need to know how to do it, you just have to be able to dream it. I feel that with our years of experience we have a good handle on things, however there may be issues that we are not dealing with.  Thank You.

Added by hHOFEe on October 21, 2011 at 11:58am — No Comments

Robert Westbrook Thank you!

At this time, I won't be able to afford to remain a member once this site goes "fee based". I would like to take this opportunity to express my gratitude for having the good fortune to be "in" on the discussions of what I believe to be the beginnings of the future of energy transport, whether the hho creation is stationary or mobile.

Since becoming a member I have been awed by the creativity and spirit of invention displayed by the members here and have no doubts about this country's…

Continue

Added by Robert Westbrook on October 20, 2011 at 6:00pm — 2 Comments

HHO Heater Plans Oct 20th Update

We have and always have read each and every email that is sent to us. We try to answer all of your questions but are limited to time as we live our normal everyday lives to make ends meet. We are doing our best and will continue to do so answering your questions.



As you all know by now we have released our videos free for anyone to view and to also ask questions regarding the build. This is not a business. We have not brought any income to our site in the last month or so to help… Continue

Added by HHO Heater Plans on October 20, 2011 at 1:25pm — 4 Comments

hHOFEe INITIAL RELEASE from hHOFEe

As some of you know we have been working on a fully integrated plug and play hho system. Well, good news, we are going to be releasing the first part of the system, the driver module.  Some of the specs of this module are as follows... gas flow meter input ... Full pwm and frequency adjustable rates...temp inputs with adjustable ceilings...on/off float level input with float to install in tank...in vehicle display that reads %, board… Continue

Added by hHOFEe on October 20, 2011 at 12:04pm — 4 Comments

Howard Phillips Something new: Catalytic Carbon for hydrogen production is now available to anyone (1 LPM to 20 LPM)

We are now extending an evaluation project in which experimenters are considering how to use Catalytic Carbon (CC) and optimize high-flow-rate hydrogen generators for their own Hydrogen-On-Demand (HOD) applications. Feedback from evaluators seems encouraging -- with reports that people have used CC and successfully produced hydrogen at rates of 1 LPM, 4 LPM, 6.5 LPM and 20 LPM. The method is scalable and should be capable of producing hydrogen at any rate desired, with the right cell design.…

Continue

Added by Howard Phillips on October 18, 2011 at 11:30pm — 2 Comments

Martin Moore Wanted - PTFE mesh

Dear Colleagues,

Does anyone know of a source of PTFE mesh?  I am looking for something that has a hole size or around 1.5 to 1mm or less (probably not less that .5mm though).  I suppose it could be knitted (I don't think my mother could do it though lol!). I estimate that I need about 1000mm X 500mm in total.

A UK source would be good but of course I can buy from anywhere - it just takes a bit longer.

Any help or advice on leads would be…

Continue

Added by Martin Moore on October 9, 2011 at 11:26am — 1 Comment

HHO Heater Plans Some numbers 9-18-11 83 min. test

We will be starting a series of tests on the Heater using the Punch 5.0 Slim cell.



This test was ran in 66 deg f. temp. at start. Unit was not ran for over 24 hours before test.



Also Note: This first test was ran with the glycol pump running full tilt. with 20 oz. of water with

1 tbl spoon of glycol.



Also note: This… Continue

Added by HHO Heater Plans on September 18, 2011 at 8:22pm — No Comments

Jim Mitchell Wiring Schematics

I read somewhere that there is a company that will for a small fee send you a wiring schematic of your complete automotive system. I don`t remember if you had to include vin number or not. Does anyone know about this, or has my imagination run wild again? Thanks in advance for the help....Jim

Added by Jim Mitchell on September 1, 2011 at 5:09pm — 4 Comments

DAN MERRICK gadgetman groove

guys and gals I told you I was going to test the groove out and Im here to tell you It positively works as Ron says. I spent 2 days with him helping him do the groove and if your looking to get started  as a business give him a call and I can honestly say he wont let you down.The people that I worked on their cars all were pleased and if youve been doing hho only you know that is hard to please them all. This is my testimony as I said Id give. Come join the gadget man groove as Ron says… Continue

Added by DAN MERRICK on August 26, 2011 at 10:10pm — No Comments

John Viljoen Beating the MAP sensor - massive gains in economy!

It looks like I may eventually beaten the MAP sensor with a simple MAP sensor enhancer which I have been experimenting with. If the data is right I have now increased my fuel economy from around 11km per liter (town driving) to over 30km per liter (town driving). I drive a 2000 model 1600 VW Polo. The details of my exploits are on my website www.hydroxypower.co.za. I still need to do more tests to benchmark my results.

Added by John Viljoen on August 18, 2011 at 7:09pm — 1 Comment

Samuel Burlum Extreme Energy Solutions to be Featured on Cable TV Program

Film crews and staff of the Neighborhood Journal, recently visited the Extreme Energy Solutions Facility to shoot footage of the facility, and interviewed Extreme Energy Solutions clients, technicians, sales representatives, and management to discuss their leading product; the InterCharger/SMART Emissions Reducer. The Extreme Energy Solutions featured segment will first air on Monday, June 25, 2011, and will continue for the next two weeks straight, at the times of 8:00 am, 10:30 am, 6:30 pm,… Continue

Added by Samuel Burlum on July 14, 2011 at 5:43pm — No Comments

Joe Shea Contract from Conference Site - Pretty Pricey

As promised, I got the conference site contract today and unfortunately it is way beyond outr budget.  While the $rooms with meals would cost $180 per person for two days and nights, we'd have to pay $10 for each visitor.  While the rooms and meals were $5,400 altogether (and included free kayak and canoe rental), the per-visitor charge was $10 each, and they wanted $300 for those who arrived early (i.e., before 3pm) and $600 for a conference room we didn't need (there is one in the facility…

Continue

Added by Joe Shea on July 12, 2011 at 4:00pm — No Comments

hydrosmith Sprinter 2.7 diesel

Hi I am trying to put HHo on my diesel 2.7 Turbo charged sprinter Van. I built a dry cell 8 x 8 two cell five neutrals each cell 14 plate I have a wideband oxygen sensor. With two bubblers. This 2.7 Turbo diesel itis used in small RV's and sprinter vans it's 2006 I inject. the HHO under the air cleaner before the Turbo to make sure the HH0 is dry. I have added a volo chip well the good news is engine doesn't come on. But I have not gotten one little iota of fuel savings kind of depressing. I… Continue

Added by hydrosmith on July 9, 2011 at 10:43pm — 3 Comments

DAN MERRICK hho and hhhn fuel rally

Pecostwister is holding another fuel run rally October 7 and 8th 2011 at carlsbad new mexico .Were going to have first place best percent mileage increase will be 500 dollars and also pay 2nd and third. We are going to have seminars on hho tech. and fuel chemestry and the new ammonia tech. We are inviting anyone who can make it there are plenty of motels and things to see .I will be showing my newest fuel reformer and explaining how it works and what it works on. we will also have seminars on… Continue

Added by DAN MERRICK on July 1, 2011 at 9:44pm — No Comments

Joe Shea PSAs for HHO Games, and Conference site information

Good news!  Bright House has offered to air PSAs for the next HHO Games, and Manatee Educational Television (METV, which is a prize-winning producer) has agreed to produce them for us.  The last time, they ran them for 2 1/2 weeks a total of 480 times on all the cable shows.

 

After initially being rejected, I am now making progress with the conference site, which is an ideal way to cross-pollinate ideas from many developers and make new contacts. About two weeks from now, we…

Continue

Added by Joe Shea on June 30, 2011 at 5:32pm — No Comments

Blog Topics by Tags

Monthly Archives

2012

2011

2010

2009

2008

Warning

WARNING THESE DEVICES CAN CAUSE PROPERTY DAMAGE AND POTENTIALLY CAUSE BODILY HARM.IF YOU ARE A MINOR STOP AND GET ADULT SUPERVISION. IF YOU ARE UNSURE ABOUT ANYTHING ASK SOMEONE WHO KNOWS THE ANSWER FIRST. THIS SITE IS HERE TO HELP PEOPLE BE SAFE, NOT TO ENCOURAGE RECKLESS BEHAVIOR. IF YOU DECIDE TO BUILD OR USE A HHO DEVICE YOU DO IT AT YOUR OWN RISK. PLEASE TAKE ALL SAFETY PRECAUTIONS. PLEASE READ THE TERMS OF SERVICE LOCATED AT THE BOTTOM OF ALL PAGES.

Translate HHOINFO

HHOINFO DEALS

Special "How We Did It" DVD - Fully Automatic HHO Heater Build Documentary

   

The Original "How We Did It"

Fully Automatic HHO Heater Documentary

On A New…

BUY ANY HHO SYSTEM AND RECEIVE A FREE MHE UNIT THROUGH FEB

Pre-heat your fuel! Better fuel vaporization=better MPG gains!

Buy any HHO system from BetterMPGtoday.com and receive a free magnetic heat exchanger (MHE) to pre-heat your fuel line (over $40 value) absolutely free. Be sure to let us know you are a HHOInfo user to receive your free MHE unit. Offer…

120v and 240v HHO units by Punch HHO Expires: Feb/10/2012

I have three 55 plate home units in stock ready to ship, I will give you a special price if you say you came from HHO INFO.

 

I also had these radiators specially made to use with these units, and they work great for maintaining system temps!

 

If you are interested in just the radiator, I will sell them for $75 each to HHO INFO members. I have fifty in stock.

 

Hit me up at PunchHHO@gmail.com

Website is…

1 LPM to 50 LPM HOD Business Opportunity

1 LPM to 50 LPM HOD Business Opportunity

During the past 3 months catalytic carbon has been sent to more than 30 experimenters worldwide for evaluation. All reports received to date are encouraging. These tests show that anyone can use CC and produce pure hydrogen at any desired rate. Test results are available online.

 

What’s next?

The CC chemistry will work with no additional development, but apparatus must be built and…

H2Jobs.com 

Jobs

Post a Job! $30 for 30 days

 

© 2012   Created by gabet123.

Badges  |  Report an Issue  |  Terms of Service

Live Chat